M3-205 NO ODOR
No odor, CARB compliant, High flash point
M3-205 is a CARB Compliant mastic remover with a flash point over 225 degrees F. The product has a slight odor and is easily rinsed with water. This is a great product for your “sensitive” jobs. This product has the lowest odor of all the solvents. Contractors love this product for jobs in hospitals, on airbases, or in schools. The very high flash point makes this one of the safest mastic removers in the marketplace. Sold in 5 gallon pails or 55 gallon drums.
Directions:
1. Read and understand the safety data sheet (SDS) when using this product.
2. Prepare a safe work area by protecting walls, drains, carpeting, cracks, woodwork and any other surface that may come in contact with the mastic remover. Set up decontamination chambers and a negative air system.
3. Remove floor tile according to local and federal regulations.
4. Apply Twin-Chem Citrus Plus Mastic Remover to the defined areas, either manually or with a pump spray until areas are completely saturated. Agitate the product with a stiff bristled broom or brush.
5. Allow the mastic remover to penetrate and soften the adhesive for at least 20-30 minutes.
6. After the mastic has dissolved, use a squeegee to collect liquefied mastic in a pile and use an absorbent to soak up liquid. Dispose of waste according to local and federal regulations.
7. Once the adhesives have been satisfactorily removed, use a wetting agent, to wet out and remaining particles to make certain they don’t become airborne.
8. The final step is to use a heavy-duty degreaser, to remove residual mastic remover from the substrate and to speed up the time between mastic removal and resurfacing. The degreaser is applied straight and scrubbed into the surface as water is added, with agitation, to ‘float’ the solvent out of the substrate. This will speed up time between mastic removal and a resurfacing.
9. Allow the surface to dry a minimum of 72 hours before applying new mastic and/or new flooring for most cases and in normal ventilation, temperature and intact substrate. Any variations in these can prolong drying time. Please note lower odor and higher flash point removers will more slowly than removers with a lower flash point and higher odor.
10. Finally, test the substrate by sprinkling a few drops of water on the surface. If they spread out and soak in, then your surface is ready. However, if the water beads up like water on a newly waxed surface or you can see rainbow splashes in the water, you will need to re-clean following instruction numbers 8 and 9. This is recommended for all applications.
Boiling Point: 462-529F
Freezing Point: -90.4F
Flash Point: >228F (TCC)
DOT Shipping Class: 70
Shipping Weight: 5 gal. pail 38 lbs.
55 gal. drum 423 lbs.
Specific Gravity: .810-.830 at 68F
Solubility in Water: Nil
Coverage Rate: 100 – 125 sq ft / gal
Reactivity: Stable
HFIS Rating: 1-2-0
Shelf Life: None
NMFC#: 48580
DOT Shipping Name: Not DOT Regulated On containers less than 120 gallons
WARRANTY NOTICE: we make no warranty either expressed or implied nor accepts any liability or responsibility for any damages beyond the purchase price, as we cannot control users handling or use, or the effect of use.
$117.95 for a 5 gal Pail/$955.50 for a 55 Gal Drum.
BUY MORE SAVE MORE
Buy a pallet (36) pay $109.50 per 5 gal pail or buy a pallet (4) pay $875.95 per 55 Gal Drum. Contact us for pricing if you require a larger order. Free freight on 4+ Pallets
You must be logged in to post a comment.