Hint of citrus odor, High performance
Citrus Plus is a powerful low odor mastic remover with a hint of citrus scent. It is formulated to give you the high square foot coverage expected from a high performance product but will emulsify in water for easy clean up. The slight and pleasing citrus odor, coupled with the high performance, makes Citrus Plus an easy choice for your everyday mastic remover needs. Flash point is 161 degrees F. Sold in 5 gallon pails or 55 gallon drums.
Directions:
1. Read and understand the safety data sheet (SDS) when using this product.
2. Prepare a safe work area by protecting walls, drains, carpeting, cracks, woodwork and any other surface that may come in contact with the mastic remover. Set up decontamination chambers and a negative air system.
3. Remove floor tile according to local and federal regulations.
4. Apply Twin-Chem Citrus Plus Mastic Remover to the defined areas, either manually or with a pump spray until areas are completely saturated. Agitate the product with a stiff bristled broom or brush.
5. Allow the mastic remover to penetrate and soften the adhesive for at least 20-30 minutes.
6. After the mastic has dissolved, use a squeegee to collect liquefied mastic in a pile and use an absorbent to soak up liquid. Dispose of waste according to local and federal regulations.
7. Once the adhesives have been satisfactorily removed, use a wetting agent, to wet out and remaining particles to make certain they don’t become airborne.
8. The final step is to use a heavy-duty degreaser, to remove residual mastic remover from the substrate and to speed up the time between mastic removal and resurfacing. The degreaser is applied straight and scrubbed into the surface as water is added, with agitation, to ‘float’ the solvent out of the substrate. This will speed up time between mastic removal and a resurfacing.
9. Allow the surface to dry a minimum of 72 hours before applying new mastic and/or new flooring for most cases and in normal ventilation, temperature and intact substrate. Any variations in these can prolong drying time. Please note lower odor and higher flash point removers will more slowly than removers with a lower flash point and higher odor.
10. Finally, test the substrate by sprinkling a few drops of water on the surface. If they spread out and soak in, then your surface is ready. However, if the water beads up like water on a newly waxed surface or you can see rainbow splashes in the water, you will need to re-clean following instruction numbers 8 and 9. This is recommended for all applications.
Boiling Point: 336F-473F
Freezing Point: -103F
Flash Point: >153F (TCC)
DOT Shipping Class: 70
Shipping Weight: 5 gal. pail 37 lbs.
55 gal. drum 417 lbs.
Specific Gravity: .819-.829 at 68F
Solubility in Water: <3%
Coverage Rate: 100 – 150 sq ft / gal
Reactivity: No Data available
HFIS Rating: 1-2-0
Shelf Life: None
NMFC#: 48580
DOT Shipping Name: Not DOT Regulated On containers less than 120 gallons
WARRANTY NOTICE: we make no warranty either expressed or implied nor accepts any liability or responsibility for any damages beyond the purchase price, as we cannot control users handling or use, or the effect of use.
$103.50 for a 5 gal Pail/$1075.95 for a 55 Gal Drum.
BUY MORE SAVE MORE
Buy a pallet (36) pay $96.15 per 5 gal pail or buy a pallet (4) pay $998.50 per 55 Gal Drum. Contact us for pricing if you require a larger order. Free freight on 4+ Pallets
You must be logged in to post a comment.