NC Filtration Stage l Pre Filters 24x24x.5 40/Cs

First Stage Pre Filters

A pre filter is the primary layer of filtration that collects large particles before they reach the HEPA filter. Eliminating these larger particles, dust and hair extends the life of your HEPA filter. Occasional vacuuming of the exterior of the unit will help extend life of the filters. Frequent pre filter changes will also prolong the HEPA filter life.  Primary layer of filtration that collects large particles before they reach the second stage filter and HEPA filter. Removes large particles up to 10 microns
and larger from the air flowing through the unit, thereby preventing premature loading of the second stage and HEPA filters.

The pre-filter pad is recommended to be changed as it becomes loaded and the airflow capacity of the unit decreases—or the pressure gauge at the control panel exceeds 2.6 inches at high speed or 1.9 inches at low
speed, of W.C.

• Includes case of 50 filters
• Designed to help extend the life of your pleated filters, ring panel filters and HEPA filters
• Captures largest particulates as a 1st stage filter
• Fits Aerospace America 9143 , 9100, 9103, Abatement Technologies HEPA Aire H2KMA,  HEPA Aire H2KM, BD2KM Bulldog, HEPA AIRE PAS1600SHS, PAS5000K, Omnitec OmniAire 2200C, 2200UL HEPA Air Machine, NC Filtration 2000 Series.

Pre-filters not only provide an additional line of defense against airborne particulate matter, but also protect the HEPA filter from particulates that could clog or damage it. Pre-filters are a cost-saving measure since they extend the useful life of the costlier HEPA filters.

 

$50.00 (40/CS) Buy 10+ $45.83

28Cs/Pallet 1 Pallet + $41.55    2 pallets +$38.25  Pallets + $35.25 1/2 truck (13 Pallets) $32.65