Sentinel SBP Stain Blocking Primer is a Zero V.O.C., water based, low odor, fast drying coating designed to block tannin and water stains from bleeding through while prepping the surface for a topcoat. Sentinel SBP can be used on a number of surfaces including wall board, wood, plaster, stucco and concrete. AVAILABLE IN A WHITE FINISH
Application Information (Always follow product label instructions for best results)
SURFACE PREPARATION:
New Work: Surfaces must be clean and dry. Remove all dust, dirt, mold, mildew and other residues prior to application. Newly plastered walls must be allowed to dry thoroughly prior to application. Masonry must be allowed to adequately cure. Remove any efflorescence prior to application.
For Old Work: Surfaces must be clean and dry. Remove all dust, dirt, loose paint, grease, wax and other residues prior to application. Clean smoke damaged surfaces thoroughly prior to application.
DIRECTIONS FOR USE:
Surfaces must be clean, dry and free of loose debris. For best results the application area should be at least 60° F. with humidity levels below 70%. Shake or stir SBP thoroughly before using.
Coverage Rates: range from 300- 400 sq. feet per gallon, depending on the porosity of the surface being sealed. Application: Apply Sentinel SBP using a paint brush, 1/4” to1/2” nap roller or airless sprayer. Apply a thin uniform coat. When using an airless sprayer, mix coating thoroughly and use a .015-.020 tip size. Set pressure on sprayer to 2200-3000 psi.
Clean Up: Clean equipment and spills with soap and warm water. DO NOT ALLOW COATING TO FREEZE.
PROPERTIES:
Physical state: Liquid
Color: White
Odor: slight
pH: 8.0-9.0
Boiling Point: 212-290°F
Flash Point: None to boiling
$129.50 1 pallet (48) $120.00 2 Pallets+ $111.50 5 Pallets+ $104.00
You must be logged in to post a comment.