Sentinel 539 Antimicrobial Odor Encapsulant has all the characteristics of Sentinel 538 with the added benefit of antimicrobial protection which inhibits the growth of mold and mildew on the dried sealer coating surface.
*This sealer contains a fungistatic agent which inhibits the growth of mold and mildew on the dried surface of the sealer.
Note: For best results, use this after the affected area has been cleaned and treated with one of Sentinel’s quality odor removers, such as Sentinel 531 Smoke & Odor Counteractant or Sentinel 522 Smoke & Odor Cleaner & Destroyer.
Water Based Zero V.O.C’s
Multi- Surface Sealer/ Primer One Coat Application
Available in a White or Clear Finish Interior/ Exterior
PRODUCT DESCRIPTION
Sentinel 539 Sealer/Primer Odor Encapsulant is a professional strength, low – odor, fast drying sealer encapsulant used to seal and lock down odors commonly found on restoration projects, Sentinel 539 has the added benefits of antimicrobial product protection, inhibiting the growth of mold/mildew on the coating surface. On most surfaces a single coat of Sentinel 539 will
lock down odors. Sentinel 539 Odor Encapsulant product performance remains consistent through seasonal changes of temperature and humidity. Sentinel 539 does NOT contain materials cited in 21 CFR 189 Substances Prohibited For Use in Human Food.
SENTINEL’S RESTORATION CLEANING PROCESS
Before using Sentinel 539 to lockdown the space of unwanted odors, first clean dirt, grease, grime and soot, from floors, walls, ceilings and other surfaces using Sentinel 315 Smoke and Soot Wash and/or Sentinel 522 Smoke & Odor Cleaner/ Destroyer.
DIRECTIONS FOR USE: (FOR PROFESSIONAL USE ONLY)
Preparation: Surfaces must be clean, dry, and free of loose debris. For best results the application area should be at least 60˚ with humidity levels below 70%. Shake or stir 539 thoroughly before
using. Coverage rates range from 200 – 400 sq. feet per gallon, depending on the porosity of the surface being sealed. Apply Sentinel 539 using a brush, 1/4”to 1/2” nap roller or airless sprayer.
Apply a thin uniform coat. When using an airless sprayer with 538 mix coating thoroughly and use a .015 – .020 tip size. Set pressure on sprayer to 2200 – 3000 psi. Clean Up: Clean equipment
and spills with soap & warm water. DO NOT ALLOW COATING TO FREEZE
SPECIFICATIONS:
APPEARANCE WHITE or Clear
APPROXIMATE BOILING POINT 212°F
ODOR LOW
VOC CONTENT: 0g/L
pH 6.0 – 8.0
$65.95 per gallon. $256.50 per case (4) 1 Pallet (50 cases) $236.95 2 Pallets $220.00 3 Pallets $205.50
$256.50 per 5 Gal 1 Pallet (48) $236.95 2 Pallets $220.00 5 Pallets $205.50
You must be logged in to post a comment.