Sentinel 24-7 ZERO High-Build is a thick interior grade coating that contains no Volatile Organic Compounds (VOCs), is free of Hazardous Air Pollutants (HAPs), and offers virtually no odor. Designed for porous surfaces and other environments where a single, thick coat is preferred. Sentinel 24-7 ZERO High-Build offers exceptional bonding to a variety of substrates. Sentinel 24-7 ZERO High-Build with antimicrobial product protection is designed to inhibit the growth of stain and odor causing mold, mildew and other microorganisms on cured coating surfaces.
SENTINEL 24-7 ZERO HIGH-BUILD MOLD & MILDEW RESISTANT COATING is a flexible, durable, flame resistant interior coating that contains no Volatile Organic Compounds (V.O.C.’s), is free from Hazardous Air Pollutants (HAP’s), and offers virtually no odor. Sentinel 24-7 Zero High-Build is designed for porous substrates and other environments where a single thick coating is
preferred. 24-7 Zero High-Build can be used on most interior building materials. Sentinel 24-7 Zero High-Build with antimicrobial product protection is designed to inhibit the growth of stain and odor causing mold, mildew and other microorganisms on the cured coating surface.
MATERIAL PREPARATION:
Separation in paints and coatings in normal. Thoroughly stir and mix coating to achieve an even consistency for spraying, rolling or brushing. Product must NOT be reduced with water or solvents. This product must not be allowed to freeze. Apply in temperatures above 50°F.
SURFACE PREPARATION:
All surfaces must be clean, dry and free of loose paint, mold, dust, and miscellaneous debris and particulate. Wash and clean surfaces to remove dirt, mold, mildew, grease, and other soils. Rinse
thoroughly with water and allow to dry before applying coating. Remove peeling paint and spackle and sand where necessary. Lightly sand glossy areas. On new, sanded sheetrock surfaces, remove all dust before painting.
TINTING:
This product may be tinted with universal colorant systems to pastel colors only. Use no more than 4 ounces of colorant per gallon.
PRIMERS:
On surfaces such as framing lumber, sheetrock and plaster, this product will self-prime in one coat. On new woodwork, use an oil-based primer. On metal, use a suitable rust inhibiting primer.
PRODUCT APPLICATION:
24-7 Zero High-Build should be applied at temperatures above 50°F and with a relative humidity level that is below 50%. To assure proper antimicrobial protection, it is vitally important that all
surfaces be completely coated with 24-7 Zero High-Build. For airless applications, use a .021 – .025 tip, a minimum 2500 P.S.I. and maintain a fan size of approximately 12 inches.
When using a roller use a 3/8” nap roller and when brushing, use strokes 90° to each other. Drying time will vary with temperature and relative humidity. Coverage is dependent on the porosity of the surface.
LIMITATIONS:
This product does NOT protect users or others against foodborne or disease causing bacteria. This product is not designed to be used in areas with temperatures less than 50°F, excessive
heat, corrosive chemical environments, or on exterior siding or horizontal floor and deck areas.
WARRANTY:
Sentinel 24-7 Zero High-Build has a 10 year limited warranty against the visible growth of mold and mildew on the cured coating surface.
Eggshell finish
$252.95 1 Pallet (48) $235.95 2 Pallets+ $217.50 5 Pallets+ $202.95
You must be logged in to post a comment.