Omni Pro Mold Resistant Coatings are designed for restoration professionals and applicators to combat mold and mildew on a wide range of interior surfaces.
• Mold and mildew resistant coating formulated with an advanced biocide blend that prevents the growth of mold and mildew* on the dried paint film
• 10-Year interior application mold & mildew warranty*
• Dry in 1 hour
• For professional use; ideal for new construction, remodeling or remediation of interior surfaces
• Use on interior poured concrete, concrete block, brick/masonry, stucco, wood, plywood/OSB, gypsum and painted surfaces
• Suitable to use on CPVC and PVC
• Clear contains UV tracer to ensure full coverage; White can be tinted to woodtone
• Water-base formula; Soap & water cleanup
• Passes ASTM 5590, 3273 and G-21 Test
*This product contains a mildewcide to prevent the growth of mold and mildew on the paint film only
DESCRIPTION AND USES
OmniPro Mold Resistant Coating White is a white mold resistant coating for new construction, remodeling, or repair projects. OmniPro Mold Resistant Coating White will prevent future mold and mildew growth on the paint film and protect porous and semi-porous masonry surfaces from moisture and mildew damage. OmniPro Mold Resistant Coating Clear is for use on interior poured concrete, concrete block, brick/masonry, stucco, wood, plywood/OSB, gypsum, and painted surfaces. OmniPro Mold Resistant Coating White is formulated with a biocide
blend to prevent mold and mildew growth on the surface of the dried coating film only. OmniPro Mold Resistant Coating White promotes water resistance and protection from stains but will not correct mold and mildew associated with chronic water and moisture intrusion.
FOR PROFESSIONAL USE ONLY
For Warranty terms and conditions, please visit: Aramsco.com/terms-conditions
PERFORMANCE CHARACTERISTICS
• White, water-based coating
• Prevents future mold and mildew growth on the dried paint film.
• Protects porous and non-porous surfaces from mold and mildew damage.
• Interior use
• Fast dry, can be re-coated in 1 hour.
• Safe to use on CPVC and PVC
PRODUCT APPLICATION
Surface Preparation
ALL SURFACES: Surface must be structurally sound. Remove all dirt, grease, oil, salt, and chemical contaminants by washing the surface with a Heavy-Duty Degreaser, commercial detergent or other suitable cleaner. Remove all mold and mildew with an appropriate cleaner. Rinse thoroughly with fresh water and allow to fully dry. All surfaces must be dry at time of application. Apply on to pH stable concrete (8-10 pH).
WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC, EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN, PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-Approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National
Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
Tinting
This product can be tinted with universal colorants if desired. Maximum of 2 oz. of colorant per gallon. For a wood tone look, use the following tint formulation as a guide, and adjust as desired. Be sure to apply a test sample to insure acceptable color for each specific project.
Application
Mix OmniPro Mold Resistant Coating White thoroughly prior to and intermittently during use. Be sure that any settled material is dispersed thoroughly into solution. Apply OmniPro Mold Resistant Coating White with a brush, roller, or sprayer. For airless spraying, use a .015 tip and medium pressure. Apply when air and surface temperatures are 40-90oF. OmniPro Mold Resistant Coating White will prevent the growth of mold & mildew on coating surface when applied up to 400 sq. ft. per gallon. Coverage rates vary depending on surface porosity and desired coverage. Only one coat is necessary, a second coat can be applied if desired.
Dry Time
OmniPro Mold Resistant Coating White dries to the touch in 30 minutes. Can be recoated in 1 hour. High humidity and/or cool temperatures may lengthen the drying times.
Limitations
This product does not protect users against illness caused by food borne bacteria. Aramsco/OmniPro does not warrant or guarantee that indoor air quality or health related issues will be reduced or eliminated.
Clean Up
Clean all application tools with warm soapy water. Wipe up spills immediately with a clean damp cloth. Follow equipment manufacturer’s directions to clean spray equipment. See label for proper container disposal.
PERFORMANCE CHARACTERISTICS
Resistance to Mold Testing
ASTM 5590: passed
ASTM 3273: passed
ASTM G-21: passed
Water Permeance
ASTM D-1653-03: 11 perms
$265.00 per 5 Gal pail. Buy 10 save 10%
You must be logged in to post a comment.