Reinforced Floor Protection with Poly Craft Mask

The Rosin Paper Killer

Time to step into the 21st century world of floor protection. Don’t settle for old school floor protection when Poly Craft Mask is simply a better solution. Its 3-ply protection system lasts 100 times longer than Rosin Paper, and you don’t have to worry about red color bleeding onto your hard surface. The flat fiberglass rests between 40-pound craft paper on the bottom, and a polyethylene sheet on the top.

The flat fiberglass is an essential part of the product that makes it stand out. Much of reinforced craft paper out on the market uses round fiber, which risks damaging the floor. Not only did Pro-tect take that worry out of the equation, but they also made sure that there is nothing in the Poly Craft Mask that will bleed or otherwise spoil your floor’s finish.

Poly Craft Mask defends hardwood, tile, vinyl, and marble floors from damage, and effectively shields any hard surface, as well. Grab yourself a roll of Poly Craft Mask and relax in enjoying your smooth, beautiful surfaces without worry!

Helpful Tip: Blue Painters Tape is a great way to keep Poly Craft Mask in place. Want to cover the floor wall-to-wall? Clear packing tape provides a great seal and is less expensive then Blue Painters Tape.

DO NOT put the clear packing tape on a finished floor. Only use on Poly Craft Mask.

1. Pro Tect Poly Craft Mask consists of a Three-Ply Protection System: a Flat Fiberglass Meshing between a 40-pound Craft Paper and a Polyethylene Sheet
2. Perfect for Hardwood Floor Protection as well as Vinyl, Tile and Marble Floors
3. Safe on Architectural-Colored Concrete Floors, Epoxy Floor Finishes, Stamped Concrete
4. Last 100 times longer than Red Rosin Paper
5. Waterproof and Tear-Resistant
6. Quickly becoming a must-have product for quick, on-the-job surface protection

POLY-CRAFT MASK® consists of a three-ply protection system: a fiber glass mesh between a 40-pound craft paper and a polyethylene sheet. Water proof and tear resistant. Perfect for hardwood floors, tile, vinyl, marble, any surface where you used to use rosin paper. Quickly becomes a must-have product for quick on the job
protection. 100 times stronger than rosin paper.

Woven Strength: Poly-Craft Mask is PRO TECT’s most tear resistant paper. Featuring woven mesh reinforce ment, it is designed for the most demanding applications which require superior durability and toughness.

Poly Barrier: Unlike many other woven/paper laminations, Poly-Craft Mask features a coating of white UV resistant polyethylene over the top surface of the woven fabric. This top coating enhances the product’s barrier and durability properties.

Paper Backed: Poly-Craft Mask has paper backing which allows the product to absorb moisture, oil and grease. The paper surface is also easy to write on which can be a significant advantage in industrial applications.

Poly-Craft Mask weighs 25 lbs per MSF

Available in 2 sizes:

3’x200′ Rolls -covers 600 sq. feet

6’x300′ Rolls- covers 1800 sq. feet

Product Specification and MSDS

Price: 3’x200′ Rolls $79.95 Buy 20+ Rolls pay $77.95

6’x300′ Rolls $241.95  buy 10 rolls Pay $238.95

 

 

Corner Shield is a plastic protective corner guard ideal for wall corners, cabinets, counters, door protection, furniture and more. With the durable protection that these corner protectors provide, you can stop worrying about expensive or timely repairs due to dings and scratches during construction or renovation. This heavy-duty corner protection’s sealed edges ensure high impact resistance in high-traffic areas of the jobsite.

Corner Shield is lightweight, easy to cut with a utility knife, recyclable and reusable. The protective corner guard holds securely to corners when paired with a clean release tape.  Can be custom printed!!

FAQS

How to protect wall corners?

Wall corners are fragile and can be easily damaged when working on projects or renovations in the home. To protect your wall corners, consider using plastic corner guards. Depending on the type of wall surface you have, such as drywall, plaster, stucco, and other wall materials, you can choose from various corner guards. These are designed to provide maximum protection against dents, scratches, and chips while preserving the integrity of your walls. They also come in various sizes to fit different-sized corners so that you can find the right size for your needs.  Be sure to apply the guard securely and caulk any gaps between the wall and corner guard for extra protection.

How to apply corner guards?
Temporary corner guards are quick and easy to to install. Best if used with a tractional blue masking tape, simply hold Corner Shield into place, and tape along the edges. Smooth to secure surface protector.

How to cut corner guards?
Although strong, corner guards are light weight and easy to cut with a utility knife.

 

Product Spec Sheet

 

$1.75 each or $40.00 a case (24/Cs) ($1.66667 each)

Protect all types of ductwork on your jobsite from construction dust with this adhesive duct protection film. Duct Cover Shield is a duct film for dust containment, will not leave a residue on metal after removal and is highly resistant to punctures. To use, smooth this recyclable film into place, and pull the roll to the opposite side of the HVAC duct. Cut and press film into place.

This self-adhering duct protection film conforms easily to HVAC ducts, is liquid resistant and extremely durable to tears and punctures. Duct Cover Shield also helps to meet SMACNA guidelines for providing temporary closures on open ductwork.

SPECIFICATIONS

Thickness 3 mil nominal

Film Low Density Polyethylene

Adhesive Type Water-based Acrylic

Adhesion Level 12.7 oz/in

Tensile Strength 2800 psi

Temperature (Ideal) 70° F

Humidity (Ideal) 50%

Elongation (%) 525%

Chemical Name Acrylic PSA

Chemical Family Acrylic PSA Polyethylene Film

Chemical Formula Proprietary

Trade Name Duct Cover Shield

Material Use Provides temporary closures

FAQS

What is the purpose of Duct Cover Shield?

Duct Cover Shield is used to protect ductwork from drywall dust and other particulates that could damage the system. During construction, installation, or storage before installation, ductwork should be covered to avoid any buildup of dust and other contaminants.

How do I install Duct Cover Shield?
Peel back edge of the duct film and begin to unroll. Beginning at the edge of the duct, press the film down to adhere. Continue rolling onto area, applying pressure and smoothing down the film while you go. Carefully cut end with a sharp edge. To remove, roll up Duct Cover Shield and discard.

Handling and Storage
Store at room temperature. If Duct Cover Shield is stored in extreme conditions over 95° F or below 40° F allow product to return to room temperature prior to use.

Spec Sheet

Product Sheet

$35.50

Pro Tect® Liquid Mask Tub Protection, 5 gal Pails

• Tub Protection that can stay on the length of the job
• 3/4 th of a Gallon of Pro Tect Liquid Mask will cover a standard 5’ Tub
• Water-based product that dries to form a latex coating over your tubs and shower basin
• Protect tubs, showers, whirlpools from bumps, scratches and burns

Protection for Tubs and Baths

3/4 th of a Gallon of Pro Tect Liquid Mask will cover a standard 5’ Tub.  Pro Tect® Liquid Mask Tub Protection forms a “tough latex coating” over your tub, providing up to a 40 mil protection for tubs, showers, and other highly polished surfaces like porcelain, enamel, fiberglass, acrylic and glass.

How to Apply:

There are two main ways to put Pro Tect® Liquid Mask Tub Protection onto a tub or shower basin. You can paint or roll it on or spray it on with an airless sprayer. The most efficient way is an airless sprayer with over 2,500 psi. The Tub Protection is a water-based product, so no chemicals are needed to flush it out of the sprayer. We use a Greco X7 with a 17-18 tip when installing the product. If you want to apply Pro Tect® Liquid Mask Tub Protection by painting or rolling it on, there are some tricks and a “must-do” to properly protect your tub. You will have to do many coasts on the side walls. It’s important to apply a thick coat, which can’t be done with one application by brush. You can get, Pro Tect’s Tub Protection, thick enough on the flat surfaces, but the sides will run when the Liquid Mask is put on too thick. Start by applying a light coat. Come back when it has dried and apply another coat. You can always put more on so don’t toss out any left overs.

Pro Tect® Liquid Mask Tub Protection Application Instructions

Simple Tub Spray Application Instructions

Detailed Tub Spray Application Instructions

$330.00 each