One of the worst things that can happen to a home or business owner is a fire. Of all fires reported in the U.S. annually, 26% happen in the home. And tragically, these residential fires also cause the majority of fire-related deaths. But knowing where and when fires are most likely to ignite can help you protect yourself, your family, and your home from tragedy.
According to the National Fire Protection Association:
- Nearly 60% of fire deaths occur in homes without smoke alarms or with non-functioning alarms.
- 38% of home fire deaths happen in homes with no smoke alarms at all.
- Working smoke alarms cut the risk of dying in a home fire by 50%.
Where house fires originate
Kitchens
The heart of the home, kitchens are also the most common spot in the house for fires to start.2 Specifically, unattended cooking is the leading cause of kitchen fires and fire-related injuries.3
These man-made fires are also easily preventable: Keep an eye on the stove, oven, and other appliances like toaster ovens, and move combustible items away from the stove. Never leave the kitchen when you’re working with high heat during preparations like frying, boiling, or broiling—fires need only seconds to go from a small flame to an out-of-control blaze.
A few more tips for safe cooking:
- If someone else can’t watch things while you step away for a bathroom break or to help the kids, turn off the cooking appliance while you’re in the other room.
- Turn off the stove and all appliances once you’re done cooking.
- Keep everything off hot surfaces. Pay close attention to where you set dish towels or hot pads. Designate a spot, like a hook, to practice putting them back between each use.
- Roll up baggy sleeves or wear a securely fastened apron over billowy shirts or bottoms to prevent singeing.
- Keep drip pans clean—accumulated debris can catch fire.
- Do not heat your home with your oven.
- Keep a Class B fire extinguisher or fire blanket handy in case of fire. Water will only spread oil or grease and feed the flames. Fire extinguishers can be the difference between a small kitchen fire and a catastrophe. Purchase and replace fire extinguishers for the rooms where fires are most likely to start and choose the right class of extinguisher for the type of fire most likely to occur in that room.
Bedrooms
Bedrooms are one of the top three most common spots in the house for electrical fires and for fire injuries and deaths. Bedroom fires have a high potential for tragedy since they often happen when people are asleep. Electrical bedroom fires are often due to faulty or overtaxed wiring or malfunctioning lighting, but bedroom fires also start with cords, space heaters, or electric blankets. Bedding, carpeting, draperies, and other creature comforts of your bedroom are often the first items ignited in a fire.
Some tips for preventing fires in the bedroom:
- Quickly address any loose or otherwise unsafe-looking wall outlets.
- Replace extension cords, chargers, lighting cords, or other power cords as soon as they show signs of wear. If you can see the wires, it’s time for a replacement. You can have lighting shops rewire a favorite lamp if the cord is worn out.
- Don’t overload outlets by plugging in too many devices, power strips, or extension cords. Unplug devices when they’re not in use or find different spots for them.
- Place space heaters at least three feet from anything that could catch fire.
- Kids often experiment with fire in secret spots like under their bed or in the closet, and 40% of structure fires started by children happen in the bedroom. Teach children not to play with matches or lighters, and help them understand how fire ignites and spreads.
Living rooms
That beautiful fireplace in the center of the living room sold you on your home, but it needs more maintenance and care than the occasional dusting and cute decor. Heating equipment is the second leading cause of house fires, with chimneys being the most likely type of heat source to cause a fire.
Fireplaces, chimneys, wood-burning stoves, and space heaters are all culprits for starting an out-of-control fire in the living room. Practice a few safety precautions to keep that homey fire in the firebox where it belongs:
- Before you head into the cooler months and start up a cozy fire, have your chimney professionally cleaned.
- Keep combustibles, including draperies and upholstered furniture, at least three feet from the heat source.
- Invest in a fireplace screen to prevent embers from escaping.
- Never leave the fire unattended, and make sure it’s completely out before leaving the house.
- Use the recommended fuel for your heat source.
- Teach kids to keep at least three feet away from the heat source so they don’t get burned or, worse, ignite something.9
Smoke detectors protect you in every room
Placing smoke detectors throughout your home is a critical step to responding to fire regardless of the room it starts in.
Attics and crawl spaces
Inaccessible attics and crawl spaces are easy to forget about, but 13% of electrical fires start in these neglected spaces. Electrical failure or malfunction account for about 88% of these fires.
If you live in an older home, suspect dubious DIY electrical work, or want reassurance that everything is in order, hire a professional, licensed electrician to check it out and address issues. While electrical problems can be expensive to fix, the cost of neglecting it can be devastating.
Laundry rooms
Laundry rooms are where 4% of residential fires begin, with dryers being the culprit of 92% of laundry room fires.
Fortunately, preventing laundry fires is simple for the most part:
- Don’t overload your washer or dryer or pack items down. Instead, leave room for laundry to tumble. Follow your machine manufacturer’s recommendations for capacity.
- Clean the lint screen and drum between loads to prevent buildup.
- About once a year, clean the dryer exhaust vent and ducts.
- Replace plastic venting material with flexible metal venting material.
- Ensure that your appliances are plugged into outlets with the proper voltage.
Outside areas
Residential fires start outside 4% of the time. Your grill, smoker, fire pit, and even dry vegetation can be sources of outdoor fires. Prevent fire and damage to your home by setting a few rules:
- Use grills or smokers about 10 feet away from structures (including the eaves), deck railings, trailers, vehicles, or combustible materials.
- Clean your grill or smoker after every use to prevent fuel buildup.
- Keep a fire extinguisher handy when grilling.
- Keep a hose or bucket of water near firepits, and clear the area of vegetation, fuel, or other combustibles.
- Make sure fires are completely extinguished before heading back inside.
- Avoid driving on or dragging anything across dry vegetation that could cause a spark.
Other potential fire hazards
While they might not top the list, keep a close eye on the following:
Children
Kids who start fires may just be curious, but they may also be experiencing some larger emotions that they don’t know how to express. Working through and exploring the root of those emotions may not be the first thing that comes to mind to prevent fires, but it’s a critical complement to teaching kids fire safety and setting rules about matches or lighters. Safety is a mindset that starts with the tiniest members of your household.
Hair tools
Anyone who’s grazed an ear or neck while styling their hair knows that heat tools get hot enough to burn. Always unplug your beauty products and leave them to cool on a heat-resistant surface away from flammable objects.
Candles
Whether you’re creating ambiance or infusing a room with the scent of sandalwood, the open flame of a candle is a fire hazard. Never leave candles burning unattended, and be sure you set them on a heat-resistant surface away from upholstery, linens, and curtains.
Smoking
Don’t smoke in bed or near upholstered furniture, curtains, and linens that can quickly catch fire from a stray ash.
Christmas trees
Christmas tree fires often start because of faulty lights or proximity to a heat source. Keep your holiday merry and bright by inspecting older lights, putting new lights on your tree, and keeping them away from heat sources. Dry Christmas trees are also more likely to catch fire.
The Aftermath of a Fire
Smoke and soot can be toxic, creating a hazardous situation for your property or business. Even if a fire is contained in one area, smoke, and soot can travel throughout a structure. We recommend you use professionals are highly-trained, with the experience, tools, and knowledge to clean up fire damage and remove the smell of smoke, and restore your home and cherished possessions to their pre-fire condition. they will use appropriate personal protective measures to safely clean, deodorize and restore your property/business.
What to Do After a Fire – Use Caution
While waiting for help to arrive, safety is key. Here are some tips to follow:
-
- Assess whether it’s safe to stay in the house. Follow guidance from first responders.
- Electrical and “slip and fall” hazards are some of the most prevalent concerns.
- Only attempt activities that are safe for you to perform.
- Wet materials can be very heavy. Wait for officials to clear the structure first.
- If safe to enter, and weather permits; open windows and doors to “air out” the structure and help remove the smoke smell.
- Only take photos from a safe distance until officials have given the “all clear.”
What To Do After A Fire
- Limit movement in the home to prevent soot particles from being embedded into upholstery and carpets.
- Keep hands clean so as not to further soil upholstery, walls and woodwork.
- Place clean towels or old linens on rugs, upholstery and carpet traffic areas.
- If electricity is off, empty freezer and refrigerator and prop doors open.
- Clean and protect chrome with light coating of petroleum jelly or oil.
- Wash houseplants on both sides of leaves.
- Change HVAC filter.
- Tape double layers of cheesecloth over air registers.
What NOT To Do After A Fire
- Don’t attempt to wash any walls or painted surfaces or shampoo carpet or upholstery without contacting a professional. Please note if you house is built pre 1980, there may be asbestos fibers or lead paint particles released, plus chemicals from any burnt appliances and furniture. Upholstered furniture is often manufactured with polyurethane foam (PUF) containing flame retardants (FRs) to prevent the risk of a fire and/or to meet flammability regulations, however, exposure to certain FRs and other chemicals have been linked to adverse health effects. When buildings and automobiles burn, heavy metals, such as lead and copper, get dispersed. Older homes may release asbestos fibers. Plastics and electronics give off noxious chemicals and metals. All of that can contaminate air, soil and water. Ash collected after the Lahaina, Hawaii, fire in 2023 contained high levels of arsenic, lead, antimony, copper and cobalt.
- Don’t attempt to clean any electrical appliances that may have been close to fire, heat or water without consulting an authorized repair service. These pose risks of electrocution and chemicals
- Don’t use any canned or packaged food or beverages that may have been stored near the fire, heat or water they may be contaminated
- Don’t turn on ceiling fixtures if ceiling is wet. The wiring may be damaged.
- Don’t send garments to an ordinary dry cleaner. Improper cleaning may set smoke odor. Once odor is set it becomes extremely difficult to remove.
After the fire trucks leave, your home or business likely suffers from fire and smoke damage and extensive water damage from firefighting efforts. Every fire damage event is a little different, and requires a unique solution, but the general process stays the same. The steps listed below illustrate the process for the “typical” fire damage emergency.
Step 1: Inspection and Fire Damage Assessment
Conduct a comprehensive visual inspection of all affected areas. Note the extent of soot coverage on walls, ceilings, and personal belongings, as well as any structural damage caused by the fire. This step is crucial to developing a plan of action. This may be completed by a trained professional or an insurance adjudicator. If safe, you may wish to take your own records.
Step 2: Immediate Board-Up and Roof-Tarp Service
Fire damage can often compromise windows, walls, and roofs. To maintain security and to protect against further damage, board up missing windows and walls and place tarps on damaged roofs if applicable.
Step 3: Water Removal and Drying (if water damage is present)
The water removal where pumps remove the majority of the water. Use dehumidifiers and air movers to remove the remaining water and complete the drying process.
Step 4: Removal of unsalvageable materials left in your home/business.
This could be fire damaged furniture, appliances, food. clothes etc. Please note these items will contain VOC’s which are harmful to health but may also contain asbestos and heavy metals such as lead and copper. when removing fire damaged materials appropriate PPE should be worn at all times including a respirator, coveralls and gloves.
Step 5: Removal of Smoke and Soot from All Surfaces
This will require specialized equipment and techniques to remove smoke and soot from ceilings, walls, and other surfaces.
Step 6: Cleaning and Sanitizing
Cleaning all of the restorable items and structures that were damaged by the fire. There are a variety of cleaning techniques to restore your belongings to pre-fire condition. Your professional will remove odors using industrial air scrubbers and fogging equipment.
Step 7: Restoration
Restoration is the final step—getting your home or business to its pre-fire condition. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business.
Removal of Smoke and Soot from All Surfaces
In the quiet aftermath of a fire, the challenges are just beginning. Among the most pervasive and persistent issues faced by homeowners and restoration professionals alike is the presence of soot. This fine, powdery substance, a byproduct of incomplete combustion, blankets surfaces, infiltrates the tiniest of crevices, and poses significant health risks, making its effective removal a paramount concern. The prevalence of soot after a fire incident cannot be understated; it is as certain as it is problematic.
Soot particles, composed of carbon and various toxic compounds, adhere to walls, ceilings, furniture, and personal belongings, leaving behind not only a visual reminder of the fire but also an olfactory one, with its distinct, acrid smell. The challenges of soot removal extend beyond the mere aesthetic, touching on health concerns due to the potential for respiratory issues and other health effects from prolonged exposure. Moreover, soot’s acidic nature can cause further damage to materials it settles on, accelerating the deterioration of valuable items and the building structure itself.
Addressing the aftermath of a fire requires an understanding of the nature of soot, the scope of its impact, and the complexities involved in its removal. This blog aims to shed light on the prevalence of soot following fire incidents, the challenges it presents in the cleanup process, and the strategies for mitigating its effects. By delving into the intricacies of soot removal, we seek to provide insights and guidance to those tasked with restoring safety and normalcy in the wake of a fire.
Understanding Soot and Fire Damage
The aftermath of a fire presents a complex set of challenges, not least of which is the pervasive presence of soot. This fine particulate matter, a residue of incomplete combustion, blankets everything within the vicinity of a fire, from the walls of a home to the possessions it contains. Understanding the nature of soot and the broader implications of fire damage is crucial for effective cleanup and restoration efforts, as well as for safeguarding health and safety in the aftermath. This exploration delves into the composition of soot resulting from various materials burned in a fire and the potential health hazards and safety concerns it poses.
The Nature of Soot from Fires
Soot is composed of carbon particles that are produced when organic materials fail to burn completely. Its composition, however, is far from uniform; it varies significantly based on the materials that were burned.
- Organic Materials: When wood, paper, and natural fibers burn, the soot produced tends to contain a higher proportion of organic compounds, including cellulose and lignin derivatives. This type of soot can adhere strongly to surfaces and often carries a smoky odor.
- Synthetic Materials: The burning of plastics, synthetic fabrics, and other man-made materials results in soot that contains a variety of chemicals, including toxic hydrocarbons and acid gases. This soot is often more difficult to clean due to its oily or sticky consistency.
- Fossil Fuels: Combustion of coal, oil, and gas not only contributes to soot formation but also introduces sulfur and nitrogen oxides into the mix, making the soot more acidic and potentially corrosive.
Health and Safety Risks Associated with Fire Soot
The health and safety risks posed by soot are a significant concern in the aftermath of a fire. The small size of soot particles allows them to be easily inhaled, where they can penetrate deep into the lungs and even enter the bloodstream.
- Respiratory Issues: Inhalation of soot can exacerbate asthma and lead to bronchitis, other respiratory infections, and chronic lung conditions.
- Toxic Exposure: Soot particles can carry a range of toxic substances, including carcinogenic PAHs (polycyclic aromatic hydrocarbons), heavy metals, and dioxins. Long-term exposure increases the risk of cancer, heart disease, and neurological disorders.
- Skin and Eye Irritation: Direct contact with soot can cause skin irritation and exacerbate eczema. If soot particles enter the eyes, they can cause itching, redness, and conjunctivitis.
Understanding the complexities of soot and the risks it poses is the first step toward mitigating the impact of fire damage. Proper cleanup and restoration, coupled with appropriate safety measures, are essential for protecting those affected by a fire from the lingering effects of soot. By recognizing the diverse nature of soot and the hazards it presents, individuals and professionals can approach fire cleanup with the knowledge and caution necessary to ensure a safe and thorough recovery process.
Initial Steps and Safety Precautions
The aftermath of a fire presents a daunting challenge, with soot and debris posing risks not only to the structure of affected buildings but also to the health of those involved in the cleanup process. Before embarking on soot removal, it’s crucial to assess the situation carefully and take appropriate safety precautions. This guide outlines the initial steps to evaluate fire and soot damage and the necessary safety gear to protect yourself during cleanup.
Assessing the Situation
A thorough assessment of fire and soot damage is essential to understand the scope of cleanup required and to develop an effective plan of action. Here are guidelines for evaluating the extent of damage:
- Visual Inspection: Conduct a comprehensive visual inspection of all affected areas. Note the extent of soot coverage on walls, ceilings, and personal belongings, as well as any structural damage caused by the fire.
- Identify Soot Types: Different materials produce different types of soot, each with specific cleaning requirements. Identifying the types of soot present can guide the selection of cleaning methods and products.
- Check for Water Damage: Often, firefighting efforts result in water damage. Assess for wet surfaces, waterlogged materials, and potential mold growth, as these will require additional cleanup steps.
- Document Damage: Take photographs and make detailed notes of all damage for insurance purposes and as a reference for the cleanup process. Documentation is crucial for both personal records and insurance claims.
Safety Gear and Precautions
Before starting the soot removal process, equipping yourself with the proper safety gear is paramount to protect against health hazards. Here’s a list of necessary safety equipment and precautions:
- Respiratory Protection: Wear a respirator, ideally with with P100 filters to protect against inhalation of soot particles and other airborne contaminants. There are disposable respirators that are N100.
- Protective Clothing: Don long sleeves, pants, and closed-toe shoes to minimize skin exposure to soot and debris. Consider disposable coveralls for extensive cleanup tasks.
- Gloves: Use nitrile gloves (or latex if you are not allergic) to protect your hands from soot, cleaning chemicals, and sharp objects hidden within debris.
- Eye Protection: Safety goggles or glasses can prevent soot and cleaning agents from irritating or damaging your eyes.
- Ventilation: Ensure the area is well-ventilated to disperse airborne particles. Open windows and use fans to circulate air, reducing the concentration of pollutants.
- Electrical Safety: Turn off electricity to the affected area to prevent electrical hazards, especially if water damage is present.
Taking these initial steps and safety precautions seriously can significantly mitigate the risks associated with soot removal and fire cleanup. Assessing the damage thoroughly and equipping yourself with the appropriate safety gear ensures that the cleanup process is not only effective but also safe for everyone involved.
Step-by-Step Guide to Soot Removal
In the aftermath of a fire, soot removal becomes a critical task to restore the affected environment to its pre-incident condition. Soot, a byproduct of incomplete combustion, can coat surfaces with a fine, powdery residue that is not only unsightly but potentially harmful. This guide provides a comprehensive approach to soot removal, detailing how to contain the affected area, remove loose soot particles, and clean and deodorize surfaces effectively.
Containing the Affected Area
Before beginning the soot removal process, it’s essential to prevent the spread of soot to unaffected areas. Here are techniques to contain the affected area:
- Seal Off the Area: Use plastic sheeting and painter’s tape to seal doorways, vents, and other openings. This physical barrier helps to contain soot and cleaning agents within the affected area.
- Limit Traffic: Restrict access to the affected area to those involved in the cleanup process. This reduces the likelihood of soot being tracked into clean areas.
- Use Air Filtration: Deploy air scrubbers or negative air machines with HEPA filters within the contained area to capture airborne soot particles, further preventing their spread.
Removing Loose Soot Particles
Safely removing loose soot particles is a crucial step in the cleanup process. Here’s how to do it effectively:
- Vacuuming with HEPA Filters: Use a vacuum equipped with a HEPA filter to remove loose soot from surfaces. The HEPA filter is capable of trapping fine particles, preventing them from being recirculated into the air.
- Soft Brushing: For delicate items or surfaces that cannot be vacuumed, gently brush the soot away using a soft-bristled brush, capturing the dislodged particles with a vacuum nozzle held nearby.
Cleaning and Deodorizing Surfaces
Once loose soot has been removed, the next step involves deep cleaning and deodorizing surfaces to eliminate residues and odors.
- Soot-Specific Cleaners: Use cleaning agents specifically designed for soot removal. These products can effectively break down soot residues without damaging the underlying surface. Always follow the manufacturer’s instructions for use.
- Washing Walls and Ceilings: Mix a solution of soot cleaner. Using a sponge or cloth, gently wash soot-stained walls and ceilings, rinsing frequently. For painted surfaces, test the cleaning solution in an inconspicuous area first to ensure it does not damage the paint.
- Deodorizing: After cleaning, odors may persist. Use activated charcoal or commercial odor absorbers to eliminate lingering smells. For pervasive odors, consider consulting a professional who can perform thermal fogging or ozone treatment to neutralize odors at the molecular level.
By following these step-by-step instructions, individuals can tackle the daunting task of soot removal with confidence. Containing the affected area, meticulously removing loose soot particles, and thoroughly cleaning and deodorizing surfaces are key steps in restoring a clean, safe, and odor-free environment after a fire incident.
Special Considerations for Different Materials
The aftermath of a fire leaves behind soot that can cover everything in its path. However, not all materials are affected by soot in the same way, nor can they all be cleaned using the same methods. Understanding the nuances of soot removal from various surfaces is crucial for effective cleanup and preservation of affected items. This guide explores specific techniques for cleaning soot from hard surfaces like metal, glass, and hardwood, as well as strategies for addressing soot on soft, porous materials such as fabrics, upholstery, and carpets.
Soot Removal from Hard Surfaces
Hard surfaces, though seemingly easier to clean, require careful attention to avoid damage during the soot removal process.
- Metal: Soot can cause corrosion on metal surfaces if not promptly removed. Use a mild detergent mixed with water and a soft cloth to gently wipe away soot. For stubborn stains, a specialized metal cleaner may be necessary. Always dry metal surfaces thoroughly after cleaning to prevent rust.
- Glass: Glass can be cleaned using a solution of vinegar and water, which cuts through soot without leaving streaks. Apply the solution with a soft cloth and buff dry with a clean, lint-free cloth for a clear finish.
- Hardwood: Hardwood surfaces should be treated gently to avoid water damage and warping. Vacuum loose soot with a soft brush attachment, then clean the surface with a wood-safe cleaner. Apply the cleaner to a cloth rather than directly onto the wood to minimize moisture exposure.
Soot Removal from Soft Materials
Soft, porous materials pose a greater challenge due to their ability to absorb soot particles deeply into their fibers.
- Fabrics: Clothing and other fabric items may be cleaned using a washing machine with a heavy-duty detergent. Pre-treating heavily soiled areas with a stain remover can improve results. Consider multiple washes for stubborn soot stains and avoid using the dryer until the soot is completely removed to prevent setting the stains.
- Upholstery: Vacuum the upholstery with a HEPA filter vacuum to remove loose soot. For deeper cleaning, a foam upholstery cleaner can be used. Test the cleaner on an inconspicuous area first to ensure it does not damage the fabric. Professional cleaning may be necessary for delicate or heavily soiled items.
- Carpets: Begin by vacuuming the carpet thoroughly to remove loose soot. For soot stains, apply a dry cleaning solvent to a cloth and blot the stain, working from the outside in to prevent spreading. Deep cleaning by a professional carpet cleaning service may be required for extensive soot contamination.
Cleaning soot from different materials requires a tailored approach to ensure the material’s integrity is preserved while effectively removing soot. By employing the appropriate techniques and cleaning agents for each type of surface, you can restore your belongings to their pre-fire condition with minimal risk of damage.
Advanced Cleaning and Restoration Techniques
The aftermath of a fire can leave behind a daunting challenge: soot and smoke damage that affects not only the structure of a home or building but also the valuables and heirlooms within. While some items can be cleaned with basic techniques, others require advanced cleaning and restoration methods to return them to their pre-damage state. This guide explores professional cleaning solutions for comprehensive soot removal and delves into the special considerations necessary for restoring valuables and heirlooms affected by soot.
Professional Cleaning Solutions
When soot damage is extensive or involves sensitive materials, professional cleaning services offer advanced methods that go beyond the capabilities of DIY approaches. These services utilize specialized equipment and techniques to safely and effectively remove soot and smoke residues.
- Thermal Fogging: This method involves using a thermal fogger to penetrate surfaces and neutralize smoke odors, effectively reaching areas that are otherwise inaccessible.
- Ultrasonic Cleaning: Ultrasonic cleaners use high-frequency sound waves to create cavitation bubbles in a cleaning solution, which then collapse and remove soot and dirt from detailed and delicate items.
- Ozone Treatment: Ozone generators are used to break down smoke molecules and eliminate odors from rooms and furnishings, providing a deep deodorization that air fresheners and open windows cannot achieve.
When to Consider Professional Services: If the soot damage is widespread, involves HVAC systems, or affects valuable or delicate items, it’s time to consider professional soot removal services. Professionals have the expertise and equipment to handle complex situations, ensuring a thorough cleanup and restoration process.
Restoration of Valuables and Heirlooms
Valuables and heirlooms, with their sentimental and monetary value, require special attention during the restoration process. Here are techniques and considerations for restoring these precious items:
- Assessment and Documentation: Begin by carefully assessing the extent of soot damage and documenting each item’s condition. This information can be crucial for insurance purposes and in deciding the restoration approach.
- Gentle Cleaning Techniques: For delicate items, gentle cleaning techniques are paramount. Soft brushes, cotton swabs, and mild cleaning solutions can remove soot without causing additional damage.
- Professional Art and Antique Restoration: For artwork, antiques, and other highly valuable items, consult with professional restorers who specialize in art and antique conservation. These experts can employ advanced techniques to safely restore items to their original condition.
Restoring valuables and heirlooms affected by soot requires a delicate balance between thorough cleaning and preserving the integrity of the item. In many cases, the expertise of professional restorers can be invaluable in achieving this balance, ensuring that cherished items can be enjoyed by future generations.
Local Fire Damage Remediation Contractors in Kansas and Missouri (A-Z):
Clean teams of KC (816) 738-9775 1101 SE Broadway Dr, Lees Summit, MO 64081
Freshco Cleaning and Restoration 620 (417)-6521 408 North Poplar South Hutchinson Kansas 67505
Frontier Restoration (913) 800-4980 2007 E Prairie Cir, Olathe, KS 66062
MSP Environmental (816) 547-5284 7733 Grand Ave Kansas City, MO 64114
Power Dry (913) 347 6146 15220 College Blvd Lenexa KS 66219
Richards Remediation (573)-819-1351 80 Sterling Drive Harrisburg, MO 65256
SERVPRO Harrisonville/Lees Summit/E. KC (816) 837-0215 1001 W. Hunters Ridge Lee’s Summit, MO 64086
Smart Environmental Services (913)-355 -5303 4440 Oliver St, Kansas City, KS 66106-3763
Thunder Abatement (913) 548-6400 609 S Fir St, Olathe, KS 66061
Titan Environmental Services (913) 432-5500 2418 Merriam Lane Kansas City, KS 66106
Fire Damage Restoration Products
You must be logged in to post a comment.