Primary layer of filtration that collects large particles before they reach the second stage filter and HEPA filter. Removes large particles up to 10 microns
and larger from the air flowing through the unit, thereby preventing premature loading of the second stage and HEPA filters. The pre-filter pad is recommended to be
changed as it becomes loaded and the airflow capacity of the unit decreases—or the pressure gauge at the control panel exceeds 2.6 inches at high speed or 1.9 inches at low
speed, of W.C.

• Includes case of 50 filters
• Designed to help extend the life of your pleated filters, ring panel filters and HEPA filters
• Captures largest particulates as a 1st stage filter
• Fits as a 1st Stage Filter for the Dri-Eaz HEPA 500, Dri-Eaz DefendAir EX, Abatement Technologies PAS600, PAS1200, and PRED1200 Portable Air Scrubbers, NC Filtration 1900 Series Abatement Technologies PAS2400, HEPA-AIRE® H1990M, Syclone 1900 OmniAire 1000A s plus any other machine that take 18″x24″x1 filters

Pre-filters not only provide an additional line of defense against airborne particulate matter, but also protect the HEPA filter from particulates that could clog or damage it. Pre-filters are a cost-saving measure since they extend the useful life of the costlier HEPA filters.

$70.00 per case 10+ $65.00 16+ $55.00 1 pallet (32cases) $45.00

For the second Stage of air filtration. Removes smaller particles from the air.  This pleated media filter features rugged construction and provides high-quality performance at a low initial cost.  The filter is a medium efficiency, extended surface pleated panel designed for use in all types of residential, commercial, and industrial air filtration systems.  Removes smaller particles from the air. Removes particles up to 1 micron and larger from the air flowing through the unit, thereby protecting the more expensive, HEPA filter.  The ring panel filter is recommended to be changed as it becomes loaded and the airflow capacity of the unit decreases—or the pressure gauge at the control panel exceeds
2.6 inches on high speed (1.9 inches on low speed) of W.C.

NC Filtration’s Second Stage (Secondary) Pleated Filter features no by-pass, self-sealing fail-sale filtration. They are U.L. Class 2 rated and constructed with three (3) distinct layers of Deniers (15/40/6) allowing for high dust holding capacity and low initial pressure drop. Heavy internal wire support provides a sturdy filter ready to tackle your toughest jobs. The filter may be used in a variety of negative air machines and air scrubbers.

• Includes case of 12 filters
• Designed to help extend the life of your HEPA filters
• Captures medium sized particulates as a 2nd stage filte
• 100% synthetic filtration media
• moisture resistant beverage board frame
• all glued construction
• low pressure drop
• wired for extra durability
• Dimensions 24x24x2
• MERV rating — 8
• Fits as a 1st Stage Filter for the Dri-Eaz HEPA 500, Dri-Eaz DefendAir EX, Abatement Technologies PAS600, PAS1200, and PRED1200 Portable Air Scrubbers.
• Fits as a 2nd stage filter for Fits NC Filtration 1900 Series Abatement Technologies PAS2400, HEPA-AIRE® H1990M, Syclone 1900 OmniAire 1000A s plus any other machine that take 18″x24″x2 filters

Secondary filters not only provide an additional line of defense against airborne particulate matter but also protect the HEPA filter from particulates that could clog or damage it. They are a cost-saving measure since they extend the useful life of the costlier HEPA filters.

18 Cases per pallet

The H610C-99 filter is the final stage round replacement HEPA filter for Abatement Technologies, Inc.’s PRED1200, PRED1200UV, PAS1200, PAS1200UV CAP600 (fits CAP600, CAP600-UV and CAP600-UVP units S/N’s 5,001 – 59,999, manufactured after 06/02/98) and all CAP1200 Central Air Purification systems.

The actual size of the Abatement Technologies H610C-99 HEPA filter is approximately 14″ dia. x 12 1/4″ high.

HEPA or high efficiency particulate arresting filters capture 99.97% of airborne contaminants as small as 0.3 microns in size. The Abatement Technologies H610C-99 HEPA filter removes bacteria, mold spores, soot, pollens, animal hair, animal dander, dust mites, smoke particles and other allergens and lung damaging particles.

The manufacturer recommends you change the H610C-99 HEPA filter every 2 to 3 years under normal operating conditions.

The Abatement Technologies H610C-99 is UL 900 Class 2 listed.

A largely effective final stage filter!

• Dimensions (inches): 12″ Length x 14-1/4 Diameter
• Filter Type: Canister HEPA
• Efficiency Rating: 99.97% @ .3 Microns
• Media Type: Microglass
• Gasket Type: Seamless 1″ Urethane Foam on Outer Edge of Inlet Ring

How Often Should I Change H610C-99 Filters

The size and concentration of airborne contaminants, temperature, humidity conditions and duration of use determine how often filters need replacement. As the filters become loaded with particulate matter, the airflow capacity of the unit decreases and the static pressure differential across the filter increases.

Abatement PREDATOR and HEPA-AIRE Portable Air Scrubbers are equipped with easy-to-read filter change indicator lamps that illuminate when filters should be replaced. Unlike gauges, these lamps do not require operator interpretation or calculations. Average filter life (with continuous operation):

• Primary filter: 1 day
• Secondary filters: 3-7 days
• HEPA filter: 500 to 1,000 hours

Features:

• Dimensions: 12″ L x 14.25″ D
• Filter Type: Canister HEPA
• Efficiency Rating: 99.97% @ 0.3 microns
• Media Type: Microglass
• Gasket Type:  Seamless 1″ Urethane Foam on outer edge of inlet ring
• UL900 Flammability: Yes
• Fits: Abatement Technologies Predator 1200, Predator 1200UV
• Dimensions (inches): 12″ Length x 14-1/4 Diameter
• Filter Type: Canister HEPA
• Efficiency Rating: 99.97% @ .3 Microns
• Media Type: Microglass
• Gasket Type: Seamless 1″ Urethane Foam on Outer Edge of Inlet Ring

$268.50 Each

For the second Stage of air filtration. Removes smaller particles from the air.  This pleated media filter features rugged construction and provides high-quality performance at a low initial cost.  The filter is a medium efficiency, extended surface pleated panel designed for use in all types of residential, commercial, and industrial air filtration systems.  Removes smaller particles from the air. Removes particles up to 1 micron and larger from the air flowing through the unit, thereby protecting the more expensive, HEPA filter.  The ring panel filter is recommended to be changed as it becomes loaded and the airflow capacity of the unit decreases—or the pressure gauge at the control panel exceeds
2.6 inches on high speed (1.9 inches on low speed) of W.C.

NC Filtration’s Second Stage (Secondary) Pleated Filter features no by-pass, self-sealing fail-sale filtration. They are U.L. Class 2 rated and constructed with three (3) distinct layers of Deniers (15/40/6) allowing for high dust holding capacity and low initial pressure drop. Heavy internal wire support provides a sturdy filter ready to tackle your toughest jobs. The filter may be used in a variety of negative air machines and air scrubbers.

• Includes case of 12 filters
• Designed to help extend the life of your HEPA filters
• Captures medium sized particulates as a 2nd stage filte
• 100% synthetic filtration media
• moisture resistant beverage board frame
• all glued construction
• low pressure drop
• wired for extra durability
• Dimensions 24x24x2
• MERV rating — 8
• Fits as a 1st Stage Filter for the Dri-Eaz HEPA 500, Dri-Eaz DefendAir EX, Abatement Technologies PAS600, PAS1200, and PRED1200 Portable Air Scrubbers.
• Fits as a 2nd stage filter for Fits Aerospace America Econo 9143 , Full 9100, Turbo 9103, Abatement Technologies HEPA Aire H2KMA,  HEPA Aire H2KM, BD2KM Bulldog, HEPA AIRE PAS1600SHS, PAS5000K, OmniAire 2200C, 2200UL HEPA Air Machine and NC Filtration 2000 Models plus any other machine that take 24″x24″x2 filters

Secondary filters not only provide an additional line of defense against airborne particulate matter but also protect the HEPA filter from particulates that could clog or damage it. They are a cost-saving measure since they extend the useful life of the costlier HEPA filters.

18 Cases per pallet

1″ Blue & White Media Roll, Standard Efficiency, Low Pressure Drop. Used for HVAC Air Applications, water filtration, stage I filters in Negative air machines and air scrubbers and a dust protection for HVAC systems during construction, our media rolls offer a simple, space saving solution to having to stock multiple cases of custom or standard filters. Our most popular Blue & White  Media offers the lowest pressure drop in the Industry, allowing the least amount of restriction.  This media is an economical prefilter to extend the life of your final filters, or an adequate filter for less demanding, lower air flow applications.

24″X90’X1″ Pre Filter media for you to cut your own stage I filters or to use as a protective wrap!!.  makes 90 Stage I Filters for a 24×24 Machine!!!

36″x90x1 Pre Filter media for you to cut your own stage I filters or to use as a protective wrap!!.  makes 90 Stage I Filters for a 24×24 Machine and 90 Stage 1 12×12 Filters!!!

24″ $93.95

36″ $132.50

Contact us for Bulk purchases